Sensors/electronic plug connectors

Electronic module with analog connections

Electronic module with one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output. Available as …

Order number: 8900100

Electronic module

Electronic module with analog connections (Input, Output, Standby-In).

Note: Simultaneous use of bypass (accessory 8980780) and electronic insert is not possible without additional adaptation on the …

Order number: 8900105

Pt100 Supplementary module

Modul with Pt100 interface socket for 2. external Pt100 sensors.

Order number: 8900106

USB to Serial RS-232 DB9 Adapter Cable

The USB Interface Adapter Cable (2.5 m) allows to connect JULABO instruments with RS232 interface to a PC with USB port.Included in delivery: USB Interface Cable RS232 9 pin USB Typ A, CD with driver …

Order number: 8900110

SCB Converter Box

The SCB converter box converts the Stakei output signal (200–230V 50/60Hz) into a potential-free contact (3-pin). This item is only suitable for communication with the booster pump (8810020). The …

Order number: 8980024

RJ45 cable

RJ45 cable, length 5 m.

Order number: 8980071

RS232 interface cable

RS232 interface cable, length 2,5 m. Interface cable RS232 9-pole/9-pole.

Order number: 8980073

RS232 interface cable 5m

RS232 interface cable, length 5 m. Interface cable RS232 9-pole/9-pole.

Order number: 8980074

RS232 interface cable

RS232 interface cable, length 3 m.

Order number: 8980075

Extension cable

Extension cable 5 m, from control electronics to Forte HT Circulator.

Order number: 8980125

External Pt100 connector

External Pt100 connector

Order number: 8980131

Standby-plug 3 pole

External input, for an external shutoff switch, for example. In combination with analogoption 8900100 excluding PrestoPlus, Magnum91, Forte HT. Semichiller with Pro Option “3“.

Order number: 8980133

DIN-connector

DIN connector according to DIN 45321, plug-in compatible to IEC 60130-9. For signal and low load currents up to 4 A.

Order number: 8980134

Alarmplug 5 pole

Alarmplug 5 pole.

AT MAGIO MS, MAGIO MX, DYNEO DD,HE, SE, HL, SL, CF41, CF41, SL-8K, SL-14K, FK30-SL, FK31-SL only in combination with electronic module with analog connections. Semichiller SC with …

Order number: 8980135

REG EPROG-plug 6 pole

SE, HL, SL, CF31, CF41, and calibration baths in combination with analogoption 8900100. Presto A30/x40 in combination with analogoption 8900105. Semichiller with Pro Option “3“.

Order number: 8980136

Stakei Plug

Stakei Plug

Order number: 8980137

Y-adapter

Y-adapter cable for connecting 1 dual Pt100 sensor to 2 Lemosa sockets for LC Temperature Laboratory Controller.

Order number: 8980142

Extension cable

3.5 m Extension cable for Pt100 sensor, Lemosa-type.

Order number: 8981103

Electronic module with analog connections

Electronic module with one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output.

Order number: 9900100

USB Cable

USB Cable 2m, Type A-B

Order number: 9900110

USB 2.0 Repeater

USB 2.0 Repeater extension cable, length 5m

Order number: 9900112

Pressure sensor

Pressure sensor, 2 fittings M24x1.5 male (-95 ... +250 °C).

Order number: 8980771

Pressure sensor

Pressure sensor 8980772, 2 fittings M30x1.5 male (-95 ... +250 °C)

Order number: 8980772

Pressure sensor

Pressure sensor 8980773, 2 fittings M38x1.5 male (-95 ... +250 °C)

Order number: 8980773

M+R in-line Pt100 sensor

M+R in-line Pt100 sensor, 1.5 m cable (measurement and control in external system).

Order number: 8981020

M+R in-line Pt100 sensor

M+R in-line Pt100 sensor, 2 fittings M24x1.5 male, 1.5 m cable.

Order number: 8981021

M+R Adapter with Pt100 M30x1.5

M+R in-line Pt100 sensor, 2 fitting M30x1.5 male, 1.5 m cabel

Order number: 8981022

Precision reference sensor, stainless steel

Precision reference sensor with integrated measuring electronics and RS232 connection for direct use with all JULABO calibration baths. Measuring range -40.00…+300 °C, dimensions 180 x 4 mm, 1 m …

Order number: 8981002

External Pt100 sensor

External Pt100 sensor, 200 x 6 mm, diameter, stainless steel, 1.5 m cable.

Order number: 8981003

External Pt100 sensor

External Pt100 sensor, 20 x 2 mm, stainless steel, 1,5 m cable

Order number: 8981006

External Pt100 sensor

External Pt100 sensor, 300 x 6 mm, diameter, stainless steel, 1.5 m cable.

Order number: 8981010

External Pt100 sensor

External Pt100 sensor, 600 x 6 mm, st. steel/PTFE coated, 3 m cable.

Order number: 8981013

External Pt100 sensor

External Pt100 sensor, 1200 x 6 mm, st.steel/PTFE coated, 3 m cable.

Order number: 8981014

External Pt100 sensor

External Pt100 sensor, 300 x 6 mm, st.steel/PTFE coated, 3 m cable. Usable for working temperatures from -75 °C to 250 °C. Without handle.

Order number: 8981015