In the area of research and development in the automotive industry, fast and accurate temperature control is an important part of various tests and test simulations under realistic conditions. To ensure reproducible temperatures, manufacturers and suppliers require premium instruments supporting more than standard applications. The focus is on high-precision control and fast temperature changes, as offered by the high-performance instruments made by JULABO. Our instruments reliably comply with the highest requirements and solve even the most difficult temperature control applications without problems.
After the development phase of wireless charging system for electric cars, extensive validations of this charging equipment are required. The instruments from the JULABO PRESTO series simulate the cooling circuit in the charging equipment and in the vehicle, providing temperature-controlled water-glycol within a short time.
Converters and inverters are becoming increasingly important as components for vehicle construction. During development, these components must be tested under realistic conditions and subjected to a wide temperature spectrum. In this phase, the instruments of the JULABO PRESTO series deliver quick temperature changes and simulate the cooling circuits of vehicles or environmental influences.
To determine the life-time of batteries, they are subjected to different ambient temperatures in climate chambers. The JULABO PRESTO instruments simulate the cooling circuit and deliver a wide temperature spectrum.
For component tests in powertrains under different environmental conditions, not only fluids, but also air must be temperature-controlled. Here, special solutions from the JULABO PRESTO series are used.
At certain test benches, individual components must be pre-temperature-controlled. To simulate a cold start in different vehicles, fuels such as diesel or gasoline are injected in the engine at a predefined temperature. Here, the so-called injector carrier is temperature-controlled by an instrument from the JULABO PRESTO series.
Pumps are essential components of vehicle assemblies. The fluids required in development, stress, and endurance tests of pumps and their electric motors are temperature-controlled using instruments from the JULABO PRESTO series. The temperature control can be realized directly in the instrument or indirectly via plate heat exchangers.
Investigation and testing of components for electromobility require a simulation of the temperature control circuit (loop circuit) of vehicles at different temperatures.
The development of vehicle airbags assumes tests using specific burst samples. Instruments from the JULABO PRESTO series are used for the necessary pre-temperature controlling of the explosives.
JULABO PRESTO instruments provide the loop circuits for the characterization and optimization of thermal power modules.
