Technical data

Thermal C2

Thermal C2 is a clear 2 cSt silicone fluid rated for use in open bath JULABO units with a working temperature range of -90…+60 °C. Care should be taken to observe atmospheric moisture condensation in the bath fluid with prolonged sub-ambient operation in humid environments. Water and silicone fluids are not miscible. JULABO Thermal bath fluids are ideally suited for all of your temperature control applications and guarantee safe and reliable operation. Choosing the proper bath fluid is critical for the best temperature control results. Viscosity, oxidation characteristics and heat transfer of Thermal fluids are matched specifically with each JULABO temperature control unit. JULABO Thermal bath fluids have been carefully selected and optimized for maximum performance with JULABO instruments.

Technical data

Order number 5 liters 8891401
Order number 10 liters 8891400
Working temperature -90 ... +60 °C
Flash point >+75 °C
Fire point >+430 °C
(kinematic at 20 °C)
2 mm²/s
(at 20 °C)
0.873 g / cm³
Pour point -120 °C
Boiling point 229 °C
Ignition temperature 430 °C
Color clear
Specific volume resistivity aˣˣ (Ohm × cm)


Safety Data Sheet

PDF 164.06 KiB

Product Data Sheet

Thermal C2