FLW1701 Recirculating Coolers for installation below a lab bench
compact models with up to 1.7 kW of cooling capacity for installation below a lab bench
The compact FL models are suited for a wide variety of cooling tasks. Installation under a lab bench saves valuable space. 2 variants: Air-cooled (FL) and water-cooled (FLW).
Performance data depends on the mains voltage in the country of use. Please select:
Country of use | Mains voltage | Plug | JULABO voltage version code
| Order No. | 9671017.03 | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Working temperature range | -20 ... +40 °C | |||||||||||||||||||||||
| Temperature stability | ±0.5 °C | |||||||||||||||||||||||
Cooling capacity
* Performance specifications measured in accordance with DIN12876. Cooling capacities up to 20 °C measured with ethanol; over 20 °C with thermal oil unless otherwise specified. Performance specifications apply at an ambient temperature of 20 °C. Performance values may differ with other bath fluids.
|
||||||||||||||||||||||||
| Pump capacity flow rate | 23 l/min | |||||||||||||||||||||||
| Pump capacity flow pressure | 1 bar | |||||||||||||||||||||||
| Filling volume | 12 ... 17 l | |||||||||||||||||||||||
|
Dimensions (W × L × H) |
50 x 76 x 64 cm | |||||||||||||||||||||||
Product Features
- Ergonomic design and easy operation
- Splash-proof keypad
- Large, bright LED display
- Reliable Microprocessor PID temperature control
- Powerful immersion pumps, suitable for continuous operation
- Permissible temperature in return line +80°C
- Easy filling and Drain tap easily accessible
- Low liquid level protection with optical and audible alarm signal
- Integrated stainless steel bath tanks
- Front drain
- No side vents, instruments can be placed right next to other equipment
- RS232 interface for PC connection
- IP class according to IEC 60529: 21
- Alarm output, potential-free change-over contact (max. 30 VA)
|
Dimensions (W × L × H) |
50 x 76 x 64 cm |
|---|---|
| Filling volume | 12 ... 17 l |
| Weight | 82 kg |
| Pump connections | M16x1 male |
| Cooling Water Connection | G¾ in |
| Barbed fittings inner diameter | 8/12 mm |
| Working temperature range | -20 ... +40 °C |
|---|---|
| Temperature stability | ±0.5 °C |
| Setting the resolution of the temperature display | 0.1 °C |
| Temperature display resolution | 0.1 °C |
| Ambient temperature | +5 ... +40 °C |
| Return flow temperature max. | 80 °C |
Performance data depends on the mains voltage in the country of use. Please select:
Country of use | Mains voltage | Plug | JULABO voltage version code
Cooling capacity
* Performance specifications measured in accordance with DIN12876. Cooling capacities up to 20 °C measured with ethanol; over 20 °C with thermal oil unless otherwise specified. Performance specifications apply at an ambient temperature of 20 °C. Performance values may differ with other bath fluids.
|
|||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pump capacity flow rate | 23 l/min | ||||||||||||||||||||||||
| Pump capacity flow pressure | 1 bar | ||||||||||||||||||||||||
| Power | 10 A | ||||||||||||||||||||||||
| Bath tank | Stainless steel |
|---|
| Cooling of compressor | 1-stage Water |
|---|---|
| Cooling water pressure max. | 6 bar |
| Cooling water difference pressure | 2 bar |
| Cooling water temperature max. | 20 °C |
| Cooling water consumption | 2.8 l/min |
| Sound pressure level | 59 dbA |
|---|---|
| Classification according to DIN12876-1 |
Classification I (NFL) |
| IP Code according to IEC 60529 |
IP 21 |
| Pump type | Centrifugal Pump |
| Temperature control | PID1 |
|---|---|
| Temperature display | LED |
| Temperature setting | Keypad |
| 9671017.13 | 230V/60Hz (Schuko Plug - CEE 7/4 Plug Type F) (R404A) |
|---|---|
| 9671017.02 | 115V/60Hz (Nema N5-15 Plug) (R404A) |
| 9671017.03 | 230V/50Hz (Schuko Plug - CEE 7/4 Plug Type F) (R452A) |
| 9671017.04 | 230V/3PPE/50Hz (UK Plug Type BS1363A) (R452A) |
| 2 Barbed fittings for tubing 8 and 12 mm ID. (Pump connections M16x1 male) |
Overview
Pump capacity
Accessory for FLW1701
We would also be happy to send you our printed catalogs and brochures by post.
Benefits
-
![100% geprüft]()
100% Checked.
100% testing. 100% quality. Each JULABO Circulator undergoes thorough quality testing before leaving the factory. -
![Blatt wächst in einer Glühbirne]()
Green technology.
Development consistently applied environmentally friendly materials and technologies. -
![Made in Germany]()
JULABO. Quality.
Highest standards of quality for a long product life. -
![Quickstart]()
Quick start.
Individual JULABO consultation and comprehensive manuals at your disposal.
