Bath covers and gable covers

Increase energy efficiency by preventing steam leakage and the associated fluid loss.

Viton sleeves

2 Viton sleeves, dia. = 2 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930602

This accessory is suitable for:
Viton sleeves

2 Viton sleeves, dia. = 3 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930603

This accessory is suitable for:
Viton sleeves

2 Viton sleeves, dia. = 4 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930604

This accessory is suitable for:
Viton sleeves

2 Viton sleeves, dia. = 5 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930605

This accessory is suitable for:
Viton sleeves

2 Viton sleeves, dia. = 6 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930606

This accessory is suitable for:
Viton sleeves

2 Viton sleeves, dia. = 8 mm, for sensors, thermometers etc. Suitable for Calibration baths.

Order number: 8930608

This accessory is suitable for:
Hollow balls

The hollow balls are intended to cover open water baths, if mounting a fix cover is not possible or disturbing. The balls are simply put into the bath where they align to an even layer. The water surfa

…

Order number: 8970010

Details
This accessory is suitable for:
Bath lid with special cooling coil

Bath lid made of stainless steel with special cooling coil.

Order number: 8970243

This accessory is suitable for:
Bath cover with built-in heat exchanger

Bath cover with built-in heat exchanger. For the use of the heat exchanger, a hose with 10/12 mm inner diameter is required.

Order number: 9970240

This accessory is suitable for:
Additional products
Bath cover with built-in heat exchanger

Bath cover with built-in heat exchanger. For the use of the heat exchanger, a hose with 10/12 mm inner diameter is required.

Order number: 9970242

This accessory is suitable for:
Additional products
Bath cover with built-in heat exchanger

Bath cover with built-in heat exchanger. For the use of the heat exchanger, a hose with 10/12 mm inner diameter is required.

Order number: 9970245

This accessory is suitable for:
Bath cover 6 with openings

Bath cover with openings and Viton ® sleeves:
2 x 3 mm, 2 x 4 mm, 2 x 6 mm inner diameter.

Order number: 8970246

This accessory is suitable for:
Condensation trap with bath cover

Condensation trap with bath cover

Order number: 8970702

This accessory is suitable for:
Insulated lid with condensation trap

Condensa Trap - new version for FP(W)52/55/80/90/FPW91

Order number: 8970705

This accessory is suitable for:
Additional products
lockable bath cover

The lockable bath cover minimises oil vapour and odour formation at high bath temperatures.

Order number: 9970243

This accessory is suitable for:
Additional products
Flat bath cover

Flat bath cover

Order number: 9970290

This accessory is suitable for:
Flat bath cover

Flat bath cover

Order number: 9970291

This accessory is suitable for:
Additional products
Flat bath cover

Flat bath cover

Order number: 9970292

This accessory is suitable for:
Flat bath cover

Flat bath cover

Order number: 9970293

This accessory is suitable for:
Flat bath cover

Flat bath cover

Order number: 9970296

This accessory is suitable for:
Condensation trap with bath lid

The condensation trap reduces the dilution of alcoholic and oil-based bath fluids. The trap contains a cooling element, which causes the humidity of passing air to condense or freeze depending on tempe

…

Order number: 9970700

Details
This accessory is suitable for:
Additional products
Lift-up stainless steel bath cover

Lift-up Makrolon cover (WxLxH: 29x32x16 cm): Prevent liquid losses due to evaporation, protects samples from contamination to +100°C.

Order number: 8970268

This accessory is suitable for:
Lift-up Makrolon cover

Lift-up Makrolon cover WxLxH: 51x35x16 cm): Prevent liquid losses due to evaporation, protects samples from contamination to +80°C, for SW22/23, TW20.

Order number: 8970288

This accessory is suitable for:
Lift-up bath cover PURA 4

Lift-up, transparent bath cover for PURA 4 water bath up to 99.9°C. The bath cover is made from polycarbonate.

Order number: 9970580

This accessory is suitable for:
Lift-up bath cover for PURA 10

Lift-up bath cover, transparent for PURA 10 Water Bath up to 99.9 °C. The bath cover is made of p polycarbonat.

Order number: 9970581

This accessory is suitable for:
Lift-up bath cover for PURA 14

Lift-up bath cover, transparent for PURA 14 Water Bath up to 99.9 °C. The bath cover is made of polycarbonat.

Order number: 9970582

This accessory is suitable for:
Lift-up bath cover PURA 22

Lift-up, transparent bath cover for PURA 22 water bath up to 99.9°C. The bath cover is made from plexiglass and polycarbonate.

Order number: 9970583

This accessory is suitable for:
Lift-up bath cover PURA 30

Lift-up, transparent bath cover for PURA 30 water bath up to 99.9°C. The bath cover is made from plexiglass and polycarbonate.

Order number: 9970584

This accessory is suitable for:
Transparent bath cover

Transparent bath cover made of plexiglas for a temperaturer range from -10C°...+80C°

Order number: 9970247

This accessory is suitable for:
Lift-up gable bath cover made of stainless steel

The lift-up stainless steel gable hood reduces the evaporation of bath fluid and saves energy.

The rising steam is led back into the bath by a drip edge. As a result, the bath fluid remains in the bath

…

Order number: 9970253

Details
This accessory is suitable for:
Lift-up gable bath cover made of stainless steel

The lift-up stainless steel gable hood reduces the evaporation of bath fluid and saves energy.

The rising steam is led back into the bath by a drip edge. As a result, the bath fluid remains in the bath

…

Order number: 9970254

Details
This accessory is suitable for:
Additional products
Lift-up gable bath cover made of stainless steel

Stainless steel bridge including assembly frame

Order number: 9970257

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 10

Flat bath cover for PURA 10 with 4 openings, 92 mm diameter with appropriate set of rings.

Order number: 9970570

This accessory is suitable for:
Flat bath cover with sets of rings for PURA

Flat bath cover for PURA 10 with an opening, 190 mm diameter with appropriate set of rings.

Order number: 9970571

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 14

Flat bath cover for PURA 10 with 4 openings, 92 mm diameter with appropriate set of rings.

Order number: 9970572

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 22

Flat bath cover for PURA 22 with 8 openings 92 mm diameter and appropriate set of rings.

Order number: 9970573

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 22

Flat bath cover for PURA 22 with 6 openings 115 mm diameter and appropriate set of rings.

Order number: 9970574

This accessory is suitable for:
Flat bath cover with sets of rings for PURA für PURA 22

Flat bath cover for PURA 22 with 2 openings, 190 mm diameter with appropriate set of rings.

Order number: 9970575

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 30

Flat bath cover for PURA 30 with 10 openings, 115 mm diameter with appropriate set of rings.

Order number: 9970576

This accessory is suitable for:
Flat bath cover with sets of rings for PURA 30

Flat bath cover for PURA 30 with 3 openings, 190 mm diameter with appropriate set of rings.

Order number: 9970577

This accessory is suitable for: