Case Study: PRESTO A80 Process system
Cooling a Asahi 20 l reactor from 0 °C to -30 °C with a PRESTO A80 Process system
Objective
This case study tests the cooling capacity of the JULABO PRESTO A80 Process system with a 20 l glass reactor. The PRESTO A80 is connected to the reactor via two 2 m long metal hoses. The PRESTO A80 Process system has been programmed to cool down from 0 °C to -30 °C.
Test Conditions
| Product | PRESTO A80 Process system | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cooling capacity (Ethanol)
|
|||||||||||||||
| Heating capacity | 1.8 kW | ||||||||||||||
| Pump pressure | 0.4 bar | ||||||||||||||
| Duration | 1:00 hr:min | ||||||||||||||
| Test volume | 18 l | ||||||||||||||
| Setpoint 1 | 0 °C | ||||||||||||||
| Setpoint 2 | -30 °C | ||||||||||||||
| Reactor | 20l Asahi (glass) | ||||||||||||||
| Tubing length | 2 m | ||||||||||||||
| Fluid in unit | Thermal HL80 | ||||||||||||||
| Fluid in reactor | Thermal HL80 | ||||||||||||||
Environment
| Room temperature | 20 °C |
|---|---|
| Humidity | 45 % |
| Voltage version | 230V/50Hz |
Test Results
The PRESTO A80 Process system cools the reactor from 0 °C to -30 °C in 1:00 h.
| Set point |
| Temperature in the application |
| Temperature in temperature control unit |